Dear FC,
may i introduce,
![[IMG]]()
![[IMG]]()
the tubo evic
![[IMG]]()
the heater consists of three coils in parallel, 26awg ss316l, ~0.3ohms, inside borosilicate tubes inside a 18mm female glass joint. the wire connections are crimped, no solder is used in the heater. the visual wires are high temp silicone, end immediately after entering the tubes and only get warm to the touch at max....
tubo evic
may i introduce,
![[IMG]](http://i.imgur.com/xyoU2bI.jpg)
![[IMG]](http://i.imgur.com/ftwZ7V5.jpg)
the tubo evic
![[IMG]](http://i.imgur.com/Gck7aA1.jpg)
the heater consists of three coils in parallel, 26awg ss316l, ~0.3ohms, inside borosilicate tubes inside a 18mm female glass joint. the wire connections are crimped, no solder is used in the heater. the visual wires are high temp silicone, end immediately after entering the tubes and only get warm to the touch at max....
tubo evic